Basement Water Proofing Resources

If you are deciding to build your new house, you will need water proofing foundation so that you will prevent your basement to get wet. There are a lot of waterproofing products as well as water proofing system sold in the market where you can choose from. Hence, here is a short list and review of the common water proofing system used in water proofing a basement.

1. Liquid rubber as a water proofing membrane. These are easily applied as well as they dry quickly. You could do it by yourself with the use of a roller, trowel and sprayer. The liquid cures on to an elastic rubber water proof coating which is able to fill up small holes and bridges possible cracks on the walls of the foundation as your house is settling down. These liquid rubbers commonly come with long warranty as well as they are environment friendly and contains a low solvent or may even be solvent free.

2. Hot applied liquid rubber water proofing foundation. These are rubberized asphalt mixture which forms to a strong and flexible monolithic water proofing membrane. These adhere on any type of structural surface. Ideal for uneven and rough surfaces. Free of seams, monolithic and watertight that eliminated moisture build up or water migration. This water proofing foundation offers a strong protection due to the fact that the way it is applied is unlike the typical way of applying water proof mixtures.

3. Sheet membranes. Usually, self adhering asphalt membranes that are rubberized which are composed of rubberized asphalt are laminated to water proof paint. The largest one has a consistent thickness because they could be pre made to your required standard. These sheet membranes are mechanically strong and resistant to any hydrostatic pressure. This water proofing membrane could even cover the widest damaged areas or holes. These sheets could be applied on a metal, concrete, and masonry or wood surfaces in your home or building.

4. Cementitious Waterproofing. It based on cement and a flexible water proofing foundation. It is made out of a mixture of sand acrylic, Portland cement, plasticizer and other type of active waterproofing chemicals that would increase its durability and effectiveness. This water proofing membrane is very easy to apply. All you have to do is apply the mixture using a trowel or a brush. These could be bought from your local hardware. This membrane is paintable and comes in different colors. You could absolutely afford to buy this because it has low cots and it could last for along time because it is weather and corrosion resistant.

5. Lastly, the Bentonite water proofing foundation. This is made out of clay together with sodium bentonite which is sandwiched on two layers of woven or non woven polypropylene puncture resistant fabric. It could absorb plenty of water and while the clay absorbs water, the clay will swell and pushes on to the voids and cracks where it will stay permanently like a barrier against excessive water. It is very flexible and it is resistant to almost all of chemicals.

More articles:

water proofing a basement
water proofing system
water proof decks
water proofing foundation